Siemens SIMATIC ET 200SP HA System Manual page 109

Procedure
Step
1
2
3
ET 200SP HA Distributed I/O system
System Manual, 08/2019, A5E39261167-AD
Procedure
1. Use the screwdriver to pull the interlocks (
②
and ) out of the carrier module up to the
latching point of the carrier module.
2. Loosen the fixing screws
carrier module.
Move the carrier module parallel to the right by at
least 8 mm.
1. Swivel the carrier module out of the rail
2. Lift the carrier module up off the rail
Illustration
①
③
for the rail on the
④
.
⑤
.
7.3 Removing the carrier module
Removal
109