Siemens SIMATIC ET 200SP HA System Manual page 158

Technical specifications
9.6 Technical specifications of subcomponents of the ET 200SP HA
Terminal block TB45-P32+32x24V+4M+4D
Article number
General information
Product type designation
Product function
● I&M data
Supply voltage
Rated value (DC)
external protection for power supply lines
Current carrying capacity
up to 70 °C, max.
For process terminals, max.
Hardware configuration
Formation of potential groups
● New potential group
● Potential group continued from the left
Potential separation
between backplane bus and supply voltage
between the potential groups
between process terminals and supply voltage
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.
● horizontal installation, max.
● vertical installation, min.
● vertical installation, max.
Dimensions
Width
Height
Depth
Weights
Weight, approx.
158
6DL1193-6TP00-0DP0
Type P0
Yes
24 V
Yes; 24 V DC/10 A miniature circuit breaker with
type B or C tripping characteristic
10 A
2 A; Process terminals on the right side are pro‐
tected by resettable fuses for a maximum continu‐
ous current of 20 mA
Yes
No
Yes; 4 200 V DC/1 min, type test
Yes; 1 500 V DC/1 min, type test (SELV / PELV to
functional ground FE)
Yes; 1 500 V DC/1 min, type test
-40 °C
70 °C
-40 °C
60 °C
45 mm
175 mm
77 mm
155 g
ET 200SP HA Distributed I/O system
System Manual, 08/2019, A5E39261167-AD