Product Certifications - Emerson Rosemount 3051S Quick Start Manual

Quick Start Guide
9

Product certifications

Rev 2.6
Ordinary Location Certification
As standard, the transmitter has been examined and tested to determine that
the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
European Directive Information
A copy of the EU Declaration of Conformity can be found at the end of the
Quick Start Guide. The most recent revision of the EU Declaration of
Conformity can be found at Emerson.com/Rosemount.
Installing Equipment in North America
The US National Electrical Code
permit the use of Division marked equipment in Zones and Zone marked
equipment in Divisions. The markings must be suitable for the area
classification, gas, and temperature class. This information is clearly defined in
the respective codes.
9.1 USA
E5 US Explosionproof, Dust Ignition-proof
Certificate 1143113
Standards FM Class 3600 - 2011, FM Class 3615 - 2006, FM Class 3810 -
Markings
I5 US Intrinsically Safe; Nonincendive
Certificate 1143113
Standards FM Class 3600 - 2011, FM Class 3610 - 2010, FM Class 3611 -
Markings
38
2005, UL 1203 5th Ed., UL 50E 1st Ed., UL 61010-1 (3rd
Edition)
XP CL I, DIV 1, GP B, C, D; T5; DIP CL II, DIV 1, GP E, F, G; CL III; –
50 °C ≤ T ≤ +85 °C; Seal Not Required; Type 4X
a
2004, FM Class 3810 - 2005, UL 50E 1st Ed., UL 61010-1 (3rd
Edition)
IS CL I,II,III, DIV 1, GP A, B, C, D, E, F, G, T4; Class 1, Zone 0 AEx ia
IIC T4 (-50 °C ≤ T
a
[Fieldbus]; NI CL 1, DIV 2, GP A, B, C, D, T5, Ta = 70 °C;
Rosemount drawing 03251-1006; Type 4X
®
(NEC) and the Canadian Electrical Code (CEC)
≤ +70 °C) [HART]; T4(-50 °C ≤ T
February 2019
≤ +60 °C)
a
Rosemount 3051SHP