Emerson Rosemount 3051S Quick Start Manual page 40

Quick Start Guide
9.3 Europe
E1 ATEX Flameproof
Certificate DEKRA 15ATEX0108X
Standards EN 60079-0:2012 + A11:2013, EN60079-1:2014,
Markings
Temperature class
T6
T5
T4
Special Conditions for Safe Use (X):
1. This device contains a thin wall diaphragm less than 1 mm thickness
that forms a boundary between zone 0 (process connection) and zone
1 (all other parts of the equipment). The model code and datasheet
are to be consulted for details of the diaphragm material. Installation,
maintenance and use shall take into account the environmental
conditions to which the diaphragm will be subjected. The
manufacturer's instructions for installation and maintenance shall be
followed in detail to assure safety during its expected lifetime.
2. Flameproof joints are not intended for repair.
3. Non-standard paint options may cause risk from electrostatic
discharge. Avoid installations that could cause electrostatic build-up
on painted surfaces, and only clean the painted surfaces with a damp
cloth. If paint is ordered through a special option code, contact the
manufacturer for more information.
4. Appropriate cable, glands and plugs need to be suitable for a
temperature of 5 °C greater than maximum specified temperature for
location where installed.
I1 ATEX Intrinsic Safety
Certificate
Standards
Markings
40
EN60079-26:2015
II 1/2 G Ex db IIC T6...T4 Ga/Gb, T6 (–60 °C ≤ T
T4/T5 (–60 °C ≤ T
a
Process temperature
–60 °C to +70 °C
–60 °C to +80 °C
–60 °C to +120 °C
BAS01ATEX1303X
EN 60079-0:2012, EN 60079-11:2012
II 1 G Ex ia IIC T4 Ga, T4(–60 °C ≤ T
≤ +80 °C); V = 42.4 VDC
max
February 2019
≤ +70 °C),
a
Ambient temperature
–60 °C to +70 °C
–60 °C to +80 °C
–60 °C to +80 °C
≤ +70 °C)
a
Rosemount 3051SHP