Cortesia de/ Courtesy of: www.batmotos.com
6
. CYLINDER HEAD/VALVES
CAMSHAFT
REMOVAL
Turn the A.C. generator flywheel so that the
"T" mark on the flywheel aligns with the
index mark on the crankcase.
Hold the round hole on the camshaft gear
facing up and the location is the top dead
center on the compression stroke.
Remove the tensioner sealing bolt and spring.
Remove the two bolts from cam chain
tensioner and then remove the tensioner and
gasket.
Remove the camshaft gear and bolt.
Remove the camshaft from the cylinder head
Cortesia de/ Courtesy of: www.batmotos.com
Tensioner Sealing Bolt
DOWNTOWN 125i
Round Hole
Camshaft
6-8