Cortesia de/ Courtesy of: www.batmotos.com
6
. CYLINDER HEAD/VALVES
DISASSEMBLY
Take out the valve rocker arm shafts
Remove the valve rocker arms.
INSPECTION
Inspect the camshaft holder, valve rocker
arms and rocker arm shafts for wear or
damage.
*
If the valve rocker arm contact surface is
worn, check each cam lobe for wear or
damage.
Inspect the rocker arm bore, cam lobe contact
surface
and
wear/pitting/scratches/blue discoloration.
If any defects are found, replace the rocker
arm shaft with a new one, then inspect
lubrication system.
Cortesia de/ Courtesy of: www.batmotos.com
adjuster
surface
Camshaft Holder
for
Adjuster Surface
DOWNTOWN 125i
Rocker Arm Shafts
Rocker Arm Shafts
Rocker Arm Bore
Contact Surface
6-6