Cortesia de/ Courtesy of: www.batmotos.com
4
. LUBRICATION SYSTEM
INSTALLATION
Install the oil pump and oil separator and
tighten the two bolts.
The arrow mark must be keep upward.
*
Make sure the pump shaft rotates freely
and arrow on the oil pump is upside.
Install the pump drive chain and driven gear,
then set the snap ring securely on the pump
shaft.
Snap Ring
Install the oil separator cover properly.
*
Fit the tab of the separator cover into the
slit in the separator.
Cortesia de/ Courtesy of: www.batmotos.com
Arrow Mark
Oil Separator
Pump Drive Chain
Pump Driven Gear
Oil Separator Cover
DOWNTOWN 125i
Bolts
Snap Ring
Bolt
4-4