KYMCO Downtown 125i 2009 Service Manual page 43

Cortesia de/ Courtesy of: www.batmotos.com
3
. INSPECTION/ADJUSTMENT
5. Install the new oil filter.
＊
Make sure the rubber seal on the oil filter
facing the left crankcase.
6. Install the spring, O-ring and cap.
Torque:
7. Fill the crankcase with the recommended
grade oil and install the oil filler cap.
Oil capacity (after draining):
8. Start the engine and let it idle for 2－3
minutes.
9. Stop the engine and check that the oil level
is at the upper level mark on the oil filler
cap/dipstick with the scooter upright on
firm, level ground. Make sure there are no
oil leaks.
Cortesia de/ Courtesy of: www.batmotos.com
12 N-m (1.2 kgf-m)
1.0 L
DOWNTOWN 125i
Rubber Seal
3-10