KYMCO Downtown 125i 2009 Service Manual page 225

Cortesia de/ Courtesy of: www.batmotos.com
17
. BATTERY/CHARGING SYSTEM
BATTERY
REMOVAL/INSTALLATION
The battery is in the battery box behind seat.
1. Remove the seat.
2. Remove the met-in box
3. Remove four screws and then remove the
battery retainer
4. Pull battery out to expose the terminal
leads
5. Disconnect the negative (-) terminal lead (3)
from the battery first, then disconnect the
positive (+) terminal lead (4).
6. Remove the battery from the battery box.
Battery installation:
Install in the reverse order of the removal.
＊
When install the battery, first connect the
positive (+) cable and then negative (-)
cable to avoid short circuit.
Cortesia de/ Courtesy of: www.batmotos.com
DOWNTOWN 125i
(4)
(3)
17-4