KYMCO Downtown 125i 2009 Service Manual page 241

Cortesia de/ Courtesy of: www.batmotos.com
19
. STARTING SYSTEM
STARTER MOTOR
INSPECTION
Disconnect the starter motor cable ( 2) from
the start relay(1).
Connect the start motor cable directly to the
battery positive terminal (3).
If the starter motor fail to work, the starter
motor is faulty.
REMOVAL
Turn the ignition switch turned to "OFF"
position.
Release the rubber cap (1) and remove the
terminal screw (2) to disconnect the start
motor cable from the start motor.
Remove two mounting bolts (3) , then
remove the start motor.
19-3
Cortesia de/ Courtesy of: www.batmotos.com
(1)
(2)
DOWNTOWN 125 i
(3)
(1)
(2)
(3)