KYMCO Downtown 125i 2009 Service Manual page 61

Cortesia de/ Courtesy of: www.batmotos.com
4
. LUBRICATION SYSTEM
DISASSEMBLY
Remove the screw and disassemble the oil
pump as shown.
Screw
ASSEMBLY
Install the outer rotor, inner rotor and pump
shaft into the pump body.
＊
Insert the pump shaft by aligning the flat
on the shaft with the flat in the inner
rotor. Install the dowel pin.
There is one punch mark on the surface of the
inner rotor and outer rotor.
The mark is upside.
4-5
Cortesia de/ Courtesy of: www.batmotos.com
Pump Cover
Inner Rotor
Dowel Pin
Outer Rotor
Pump Shaft
Dowel Pin
Outer Rotor Inner Rotor
DOWNTOWN 125i
Pump Body
Pump Body
Pump Shaft