Viega 8350.32 Instructions For Use Manual page 33

Connecting the control
WC flush actuation
Push holder backwards until it clicks into place on the plug in the
back wall.
Observation of the prescribed connection sequence is
required. The power supply must always be connected last,
to ensure that all of the connected components function.
INFO! Mounting is much easier if the plug is inserted into the
control outside of the cistern.
Connect the red plug of the Bowden cable unit motor to the red
connection of the control.
Connect the blue connection cable from the sensor to the blue con‐
nection of the control.
Also observe section
sors" on page 37.
Ä Chapter 3.2.5 „Connecting external sen‐
Handling
33 from 48