WC flush actuation
Hold the magnetic key in front of the programming contact.
ð In the following, signals sound to show which setting is active.
Remove magnetic key to enable setting.
The following values can be set by removing the magnetic key:
Remove magnetic key after
8th acoustic signal
9th acoustic signal
10th Acoustic signal
ð A double acoustic signal is sounded as confirmation. The set‐
ting has been successfully changed.
Remove the cable of the programming contact.
Setting
Hygiene+ flush volume 3 l (fac‐
tory setting, if Hygiene+ is
active)
Hygiene+ flush volume 6 l
Hygiene+ flush volume 9 l
43 from 48
Handling