Viega 8350.32 Instructions For Use Manual page 45

WC flush actuation
Connect the cable from the programming contact onto the control.
Hold the magnetic key in front of the programming contact.
ð In the following, signals sound to show which setting is active.
Remove magnetic key to enable setting.
The following values can be set by removing the magnetic key:
Remove magnetic key after
4th acoustic signal
5th acoustic signal
6th acoustic signal
7th acoustic signal
ð A double acoustic signal is sounded as confirmation. The set‐
ting has been successfully changed.
Setting
Hygiene flush function: OFF
(factory setting)
Hygiene flush performed
24 hours after the last flush
Hygiene flush 72 hours after
the last use
Hygiene flush 168 hours after
the last use
45 from 48
Handling