Assembly; Mounting The Power Pack - Viega 8350.32 Instructions For Use Manual

3.2

Assembly

3.2.1

Mounting the power pack

WC flush actuation
DANGER!
Danger due to electrical current
An electric shock can lead to burns and serious injury and
even death.
– Work on the electrics may only be carried out by trained
electricians.
– Always de-energise the connection line before work is
commenced.
Requirements:
A 230 V mains connection is available on site.
n
The installation position of the power pack complies with the require‐
n
ments in acc. with Ä „Installation position of the power pack"
on page 17.
The connection pipeline is de-energised.
n
Remove approx. 1 cm of the insulation on the connection pipeline.
Push the connection pipeline into the clamps.
Handling
19 from 48