Setting Hygiene+ Function - Viega 8350.32 Instructions For Use Manual

3.3.2

Setting Hygiene+ function

WC flush actuation
Remove the cable of the programming contact.
Place a protective cap onto the contact.
The Hygiene+ function is deactivated when delivered. If you wish to use
the Hygiene+ function, you must program the following settings.
The flush volume for the Hygiene+ function can only be
selected if the Hygiene+ function has been activated by
choosing a flushing interval.
If no flush volume is selected after activating the Hygiene
+ function, the flush volume is set automatically to the min‐
imum volume.
Handling
41 from 48