Viega 8350.32 Instructions For Use Manual page 27

Connecting the water supply pipe
WC flush actuation
Connect the blue connection cable from the sensor to the blue con‐
nection of the control.
Also observe section Ä Chapter 3.2.5 „Connecting external sen‐
sors" on page 37.
Connect the black cable of the power supply to the outer right con‐
nection of the control.
INFO! Settings for the control can also already be made at
this point. The programming set is easier to connect if the
control is not yet installed in the cistern.
missioning" on page 39
Insert the control into the bracket in the cistern.
Fit the cable into the upper part of the cistern and fix with the cable
ties supplied. The cable must not obstruct any moving parts in the
cistern.
Handling
Ä Chapter 3.3 „Com‐
27 from 48