Table of Contents
Advertisement
Connecting the water supply pipe
WC flush actuation
Connect the black cable of the power supply to the outer right con‐
nection of the control.
INFO! Settings for the control can also already be made at
this point. The programming set is easier to connect if the
control is not yet installed in the cistern.
missioning" on page 39
Insert the control into the bracket in the cistern.
Fit the cable into the upper part of the cistern and fix with the cable
ties supplied. The cable must not obstruct any moving parts in the
cistern.
Connect the flexible hose onto the filling valve.
Handling
Ä Chapter 3.3 „Com‐
34 from 48
Advertisement
Table of Contents
