Table of Contents
Advertisement
3 Handling
3.1
Assembly information
3.1.1
Mounting conditions
3.1.2
Installation dimensions
3.2
Assembly
3.2.1
Mounting the drain
Insert seal
Domoplex drain equipment
The following requirements exist for the mounting of the drain:
The shower tray is installed.
n
The drainage line is installed all the way to the shower tray.
n
The underside of the shower tray is accessible.
n
The drainage capacity is sufficient at an accumulation height of
n
120 mm.
Ø
75
Ø
70
Fig. 2: Dimensional drawing
Proceed as follows to mount the drain:
Place the seal on the sealing surface of the drain and push into the
holding groove.
Handling
8 from 15
Advertisement
Table of Contents
