Starting Pyrolytic Self-Cleaning; Setting Both Ovens To Pyrolytic System; Cleaning Accessories With Pyrolytic Self-Cleaning - Gaggenau BX 481 112 Instruction Manual

Starting pyrolytic self-cleaning

1 Set the function selector to S.
œ symbol is displayed. Confirm with ™.
2 The
3 The switch-off time, when pyrolytic self-cleaning will
be finished, is displayed. If required, move the
switch-off time with the rotary selector. Confirm
with ™.
4 Remove all accessories and coarse soiling from the
oven interior. Confirm with ™.
Press I to start. The cleaning time elapses on the
5
display. If the switch-off time has been shifted, the
time up to the start of pyrolytic self-cleaning
elapses in the display. The lamp in the oven interior
stays off.
A signal sounds after 3 hours. A message appears in
the display. Once the appliance has cooled down, wipe
the remaining ash out of the interior with a moist cloth.
Note: For your safety, the oven door is locked. When
cooling down, the door lock is released when the
temperature drops below 200°C.
Depending on the type of soiling, white deposits may
remain on the enamel surfaces. These deposits are
residue from the food and are harmless. They do not
affect how the appliance works. If required, you can
remove these residues using lemon juice and a soft
cloth.

Setting both ovens to pyrolytic system

You can set pyrolytic system so that both ovens are
cleaned automatically one after the other.
Between cleaning of the first and the second oven, the
appliance cools down for approx. one hour. Pyrolytic
system of both ovens takes a total of approx. eight
hours.
To set the pyrolytic system for both ovens, turn both
function selectors to S. Then set the ovens as described
in "Starting the pyrolytic system".
Cleaning accessories with pyrolytic
self-cleaning
Gaggenau baking trays and grill trays are coated with a
pyrolysis-resistant enamel. However, for an optimum
oven-cleaning result, we recommend that you remove all
accessories from the oven before the pyrolytic self-
cleaning. This is the only way to ensure that the heat is
distributed evenly.
If you want to remove burnt-in residue from your baking
tray or your grill tray, you must observe the following
information:
Notes
– Remove any coarse dirt, meat juices and food
residue before the pyrolytic self-cleaning. Food
residues, grease or meat juices may catch fire
during the pyrolytic self-cleaning.
– In each case, only slide one baking tray or grill tray
into the lowest shelf in the oven.
– Slide the baking tray or grill tray in as far as it will
go.
– Wire rack, rotisserie spit, metal roasting dish,
baking stone, core temperature probe or other
accessories must not be cleaned in pyrolytic self-
cleaning mode.
– Grill trays that have stainless steel bushes may
become discoloured during pyrolytic self-cleaning.
This has no effect on usability.
Pyrolytic self-cleaning
en
29