B Asic Settings - Gaggenau BX 481 112 Instruction Manual

B asic settings

Q
Y our appliance can be individually adjusted in the basic
B a s i c s e t t i n g s
settings.
1 Turn the function selector to S.
2 Select "Basic settings" using the rotary selector.
™
3 Touch the symbol.
4 Turn the rotary selector to select the required basic
setting.
Basic setting
Brightness
Standby screen
Display
Touch field colour
Touch field tone
Touch field tone
volume
Rapid heating
Preheating signal
Signal volume
Time format
Time
Clock change
Date format
Permitted settings
Level 1, 2, 3, 4, 5*, 6, 7, 8
On*/Off
- Clock
- Clock + GAGGENAU logo*
- Date
- Date + GAGGENAU logo
- Clock + date
- Clock + date + GAGGENAU logo
Reduced*/Standard
Grey* / White
Tone 1* / Tone 2 / Off
Level 1, 2, 3, 4, 5*, 6, 7, 8
On*/off
On* / Off
Level 1, 2, 3, 4, 5*, 6, 7, 8
AM/PM / 24 h*
Current time
Manual* / Automatic
D.M.Y*
D/M/Y
M/D/Y
%
5 Touch the symbol.
6 Set the basic setting using the rotary selector.
™
7 Save with or cancel with
basic setting.
8 Turn the function selector to 0 to exit the basic
settings menu.
The changes are saved.
Explanation
Sets the display brightness
Appearance of the standby screen.
Off: No display. Use this setting to reduce
the standby consumption of your appliance.
On: Several displays can be set, confirm
™
"On" with
select the desired display.
The selection is displayed.
If the 'Reduced' setting has been selected,
only the most important information will be
shown on the display after a short time.
Selects the colour of the symbols on the
touch fields
Selects an audible signal for when a touch
field is touched
Sets the volume of the touch field tone
With rapid heating, the required tempera-
ture is reached particularly quickly.
The signal tone sounds when the cooking
compartment has heated up to the required
temperature.
Sets the volume of the audible signal
Display the clock in 24 or 12­hour format
Setting the clock
Automatically changes the clock to daylight-
savings time. If automatic: Setting the
month, day and week for when the time
should be changed over. To be set for both
summer and winter time.
Sets the date format
Basic settings
'
and exit the current
and use the rotary selector to
en
25