Table of Contents
Advertisement
Familiarising yourself with your appliance
en
Colours and display
Colours
The different colours are used to guide the user in the
relevant setting situations.
Orange
Initial settings
Main functions
Blue
Basic settings
Cleaning
White
Values which can be set
Appearance
Depending on the situation, the appearance of symbols,
values or the entire display changes.
Zoom
The setting that you are changing
will appear larger on the display.
If you have set a time and it is about
to run out, it will appear larger on
the display just before it runs out
(e.g. 60 seconds before the end, if
you have set the timer).
Pared-down
After a short while, the amount of
display
information shown on the display
will be reduced and only the most
important information will
remain.This function is pre-set and
can be changed in the basic
settings.
Standby
The appliance switches to standby mode if no function
is set or the childproof lock is activated.
The brightness of the control panel is dimmed in
standby mode.
Notes
–
Different things can be displayed in standby mode.
The default setting is the GAGGENAU logo and the
time.
–
The brightness of the display depends on the
vertical viewing angle.
10
–
You can change the display and the brightness at
any time in the basic settings. ~
on page 25
Activating the appliance
To exit standby mode, you can either
▯
Turn the function selector,
▯
Touch a control panel,
▯
Open or close the door.
You can now set the desired function. You can read
about how to set functions in the respective chapters.
Notes
–
When "Standby screen = off" is selected in the
basic settings, you must turn the function selector
to exit standby mode.
–
The appliance returns to the standby screen if you
have not made any settings for a long time after
activation.
–
When the door is open, the interior lighting
switches off after a short time.
Additional information
(
By touching the
symbol, you can call up additional
information. For example, information on the heating
function set or on the current temperature of the
cooking compartment.
Note: During continuous operation, small fluctuations in
temperature are normal after the oven has heated up.
)
The
symbol is displayed for important information
and action prompts.Important information on safety and
operation mode are occasionally shown automatically.
These messages either disappear automatically after a
few seconds or must be confirmed with ™.
Cooling fan
Your appliance has a cooling fan. The cooling fan
switches on during operation. Depending on the
appliance version, the hot air escapes above or under
the door.
After removing cooked food, keep the door closed until
the appliance cools down. The appliance door must not
be left ajar, as adjoining kitchen furniture may be
damaged. The cooling fan continues to run for a certain
time after operation and then switches off automatically.
Caution!
Do not cover the ventilation slots. Otherwise, the
appliance will overheat.
"Basic settings"
(
)
and
Advertisement
Table of Contents
