Table of Contents
Advertisement
O perating the appliance
1
C ooking compartment
O p e r a t i n g t h e a p p l i a n c e
The cooking compartment has five shelf positions. The
shelf positions are counted from the bottom up.
Caution!
–
Do not place anything on the cooking compartment
floor. Do not cover it with aluminium foil. A build-up
of heat could damage the appliance.
–
Do not slide any accessories between the shelf
positions, or they may tip.
Inserting accessories
The accessories have a locking function.The locking
function prevents the accessories from tilting when they
are pulled out.The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, make sure that
the lug ¨ is pointing downwards
▯
the safety bar © on the wire rack is at the back and
▯
on top.
Setting the heating function and
temperature
You can operate both ovens simultaneously with
different settings.
Exception: When the Pyrolytic mode (Self-cleaning
cycle) is being used in one oven, the other oven cannot
be operated.
1
Select the desired type of heating using the
function selector.
Left function selector: Main oven
Right function selector: Top oven
The selected type of heating and the default
temperature are shown in the display.
For example: Main oven, Hot air, 170 °C.
2
Turn the rotary selector to set the desired
temperature.
'
The
heat-up symbol appears in the display. The bars
continuously display the heating status. When the set
temperature has been reached, a signal sounds and the
'
heat-up symbol goes out.
Note: If the temperature setting is lower than 70 °C, the
cooking compartment light remains switched off.
If both ovens are switched on, the settings for both
ovens appear in the display. Using Q or R, you can
select the corresponding oven display for a few
seconds; using P, you can return to the display for both
ovens.
Switching off:
Turn the function selector to 0.
Operating the appliance
en
15
Advertisement
Table of Contents
