Table of Contents
Advertisement
Timer functions
en
3
Set the desired cooking time using the rotary
selector.
Press I to start.
4
The appliance starts. The timer menu is closed. The
temperature, operation mode, remaining cooking time
and cooking time end are shown in the display.
One minute before the cooking time ends, the cooking
time that is counting down is enlarged in the display.
Once the cooking time has elapsed, the appliance
switches off. The 6 symbol pulsates and a signal
sounds. The signal stops when you touch the
open the appliance door, or set the function selector
to 0.
Changing the cooking time:
Call up the "Timer" menu. Use C to select the 6
"Cooking time" function. Use the rotary selector to
change the cooking time. Press I to start.
Deleting the cooking time:
Call up the "Timer" menu. Use C to select the 6
"Cooking time" function. Use
'
time. Use
to return to normal operation.
Terminating the whole procedure:
Set the function selector to 0.
Note: You can also change the heating function and
temperature whilst the cooking time is counting down.
18
™
symbol,
Ž
to delete the cooking
End of cooking time
You can delay the cooking time end to a later time.
Example: it is 14:00. The dish requires a cooking time of
40 minutes. You want it to be ready at 15:30.
Enter the cooking time and delay the cooking time end
until 15:30. The electronics system calculates the start
time. The appliance starts automatically at 14:50 and
switches off at 15:30.
Bear in mind that food which spoils easily should not be
left in the cooking compartment for too long.
Delaying the cooking time end
You have set the heating function, temperature and
cooking time.
Touch the M symbol.
1
Use C to select the 5 "Cooking time end" function.
2
3
Set the desired cooking time end using the rotary
selector.
Press I to start.
4
The appliance switches to standby. The operation mode,
the temperature, the cooking time and the cooking time
end are shown in the display. The appliance starts at the
calculated time and switches off automatically when the
cooking time has elapsed.
Note: If the 6 symbol flashes: You have not set a
cooking time. Always set a cooking time first.
Once the cooking time has elapsed, the appliance
switches off. The 5 symbol pulsates and a signal
sounds. The signal stops early if you touch
symbol, open the appliance door, or set the function
selector to 0.
To change the cooking time end:
Call up the "Timer" menu. Use C to select the 5
"Cooking time end" function. Set the desired cooking
time end using the rotary selector. Press I to start.
the™
Advertisement
Table of Contents
