B Asic Settings - Gaggenau BOP 210 1 2 Series Instruction Manual

B asic settings

Q
Y our appliance can be individually adjusted in the basic
B a s i c s e t t i n g s
settings.
1 Turn the function selector to S.
2 Select "Basic settings" using the rotary selector.
3 Touch the ™ symbol.
4 Turn the rotary selector to select the required basic
setting.
Basic setting
Brightness
Standby screen
Display
Touch field colour
Touch field tone
Touch field tone vol-
ume
Rapid heating
Preheating signal
Signal volume
Time format
Time
Clock change
Date format
Permitted settings
Level 1, 2, 3, 4, 5*, 6, 7, 8
On*/Off
- Clock
- Clock + GAGGENAU logo*
- Date
- Date + GAGGENAU logo
- Clock + date
- Clock + date + GAGGENAU logo
Reduced*/Standard
Grey* / White
Tone 1* / Tone 2 / Off
Level 1, 2, 3, 4, 5*, 6, 7, 8
On*/off
On* / Off
Level 1, 2, 3, 4, 5*, 6, 7, 8
AM/PM / 24 h*
Current time
Manual* / Automatic
D.M.Y*
D/M/Y
M/D/Y
5 Touch the % symbol.
6 Set the basic setting using the rotary selector.
7 Save with ™ or cancel with
basic setting.
8 Turn the function selector to 0 to exit the basic
settings menu.
The changes are saved.
Explanation
Sets the display brightness
Appearance of the standby screen.
Off: No display. Use this setting to reduce the
standby consumption of your appliance.
On: Several displays can be set, confirm "On"
with ™ and use the rotary selector to select the
desired display.
The selection is displayed.
If the 'Reduced' setting has been selected, only
the most important information will be shown
on the display after a short time.
Selects the colour of the symbols on the touch
fields
Selects an audible signal for when a touch field
is touched
Sets the volume of the touch field tone
With rapid heating, the required temperature is
reached particularly quickly.
The signal tone sounds when the cooking com-
partment has heated up to the required temper-
ature.
Sets the volume of the audible signal
Display the clock in 24 or 12­hour format
Setting the clock
Automatically changes the clock to daylight-sav-
ings time. If automatic: Setting the month, day
and week for when the time should be changed
over. To be set for both summer and winter
time.
Sets the date format
Basic settings
en
' and exit the current
23