Table of Contents
Advertisement
End of cooking time
You can delay the cooking time end to a later time.
Example: it is 14:00. The dish requires a cooking time of
40 minutes. You want it to be ready at 15:30.
Enter the cooking time and delay the cooking time end
until 15:30. The electronics system calculates the start
time. The appliance starts automatically at 14:50 and
switches off at 15:30.
Bear in mind that food which spoils easily should not be
left in the cooking compartment for too long.
Delaying the cooking time end
You have set the heating mode, temperature and
cooking time.
Touch the M symbol.
1
Use C to select the 5 "Cooking time end" function.
2
3
Set the desired cooking time end using the rotary
selector.
Press I to start.
4
The appliance switches to standby. The heating mode,
temperature, cooking time and cooking time end appear
in the display. The appliance starts at the calculated
time and switches off automatically when the cooking
time has elapsed.
Note: If the 6 symbol flashes: You have not set the
cooking time. Always set the cooking time first.
Once the cooking time has elapsed, the appliance
switches off. The 5 symbol flashes and an audible
signal sounds. The signal stops early if you touch the
symbol, open the appliance door, or set the function
selector to 0.
To change the cooking time end:
Call up the timer menu. Use C to select the 5 "Cooking
time end" function. Set the desired cooking time end
using the rotary selector. Press I to start.
To terminate the whole procedure:
Set the function selector to 0.
L ong-term timer
F
W ith the appliance in hot air mode, this function keeps
L o n g - t e r m t i m e r
the temperature between 50 and 230 °C.
You can keep food warm for up to 74 hours without
having to switch the appliance on and off.
Bear in mind that food which spoils easily should not be
left in the oven for too long.
Note: To use the long-term timer, you will need to set it
to "available" in the basic settings. ~
on page 28
Setting the long-term timer
Set the function selector to ž.
1
/
2
Touch the
The default value 24 hrs at 85 °C appears in the
display. Press I to start
–or–
Change the cooking time, the cooking time end, the
switch-off date and the temperature.
Changing the cooking time 6:
3
$
Touch the
time using the rotary selector.
Changing the cooking time end 5:
4
Touch the C symbol. Set the required cooking
time end using the rotary selector.
Changing the switch-off date q:
5
Touch the C symbol. Set the required switch-off
date with the rotary selector. Confirm with ™.
6
Changing the temperature:
Set the required temperature with the rotary
selector.
Press I to start.
7
The appliance starts.
the display.
™
The oven and display lighting are switched off. The
control panel is locked; no key tone sounds when you
touch the touch keys.
Once the set time has elapsed, the appliance stops
heating. Turn the function selector to 0.
Switching off:
To end the process, turn the function selector to 0.
Long-term timer
"Basic settings"
symbol.
symbol. Set the required cooking
/
and the temperature appear in
en
17
Advertisement
Table of Contents
