[Double Card Slot Function] - Panasonic Lumix S1H Operating Instructions Manual

4. Image Recording

[Double Card Slot Function]

This sets the way recording to the card slots 1 and 2 is performed.
[ ]
[Recording
Method]
Notes about relay recording
The following video cannot be continued to be recorded on another card:
0
– [AVCHD] videos
– [Loop Recording (video)]
Notes about Backup Recording
We recommend using cards with the same Speed Class rating and capacity.
0
If the card Speed Class or capacity is insufficient when video recording,
recording to both cards stops.
Backup recording is not available with the following video. They can only be
0
recorded on a single card:
– [AVCHD] videos
– [Loop Recording (video)]
When using the following combinations of cards, recording videos, 6K/4K
0
photos, and recording with [Post-Focus] are not available:
– SD memory card or SDHC memory card, and SDXC memory card
You can register [Destination Card Slot] in an Fn button and switch the
0
recording destination slot:
[ ] [
Card Slot] (l 367)
92
[ ] Select [Double Card Slot Function]
[Relay Rec]
[Backup
Rec]
[Allocation
Rec]
] [Fn Button Set]
Selects the priority of card slots for recording.
[Destination Card Slot]: [
Relays recording to the card in the other card
slot after the first card runs out of free space.
Records the same images to both cards
simultaneously.
Allows you to specify the card slot to be used for
recording for different image formats.
[JPEG/HLG Photo Destn.]/[RAW Destination]/
[6K/4K Photo Destination]/[Video
Destination]
[Setting in REC mode]
]/[ ]
[Destination