Panasonic Lumix S1H Operating Instructions Manual page 471

The paired smartphone is registered as a paired device.
0
During Bluetooth connection, [
0
When the Bluetooth function is enabled, but a connection is not established
with the smartphone, [
Up to 16 smartphones can be registered.
0
If you try to register more than 16 smartphones, the registration information
will be deleted from the oldest first.
(iOS devices) If the Wi-Fi connection attempt fails during Bluetooth
0
connection, follow the message displayed to allow connection to the camera.
If you still cannot connect, select the SSID of the camera on the Wi-Fi setup
screen of the smartphone to connect. If the SSID is not displayed, turn off and
on the camera, then perform the Bluetooth connection settings again.
End Bluetooth Connection
To terminate the Bluetooth connection, turn off the Bluetooth function of the
camera.
[ ] [
Even if you terminate the connection, the pairing information for it will not be
0
deleted.
] is displayed in the recording screen.
] appears translucent.
] [Bluetooth] [Bluetooth] Select [OFF]
16. Wi-Fi/Bluetooth
471