Panasonic Lumix S1H Operating Instructions Manual page 554

18. Materials
[Recording was cancelled due to the limitation of the writing speed of
the card]
Insufficient card write speed for video, 6K/4K photo, or Post-Focus recording.
0
Use a card of a supported Speed Class. (l 26)
If the recording stops even when you are using a card that meets the specified
0
Speed Class rating, the data writing speed of the card is getting slow.
We recommend backing up data, and formatting (l 50).
Depending on the type of card, recording may stop part way.
0
[Now writing]
The card door or battery door is opened while writing to a card. Wait until writing is
0
finished, then turn the camera off and remove.
Lens
[The lens is not attached properly. Do not push lens release button
while lens is attached.]
Remove the lens once, and then attach it again without pressing the lens release
0
button. (l 51)
Turn on the camera again, and if it is still displaying, contact the dealer.
[Lens attachment failed. Please make sure the lens is attached
correctly.]
Remove the lens from the camera body and gently wipe the contacts on the lens and
0
the camera body using a dry cotton swab.
Attach the lens, turn on the camera again, and if it is still displaying, contact the
dealer.
Battery
[This battery cannot be used]
Use a genuine Panasonic battery.
0
If this message is displayed even when a genuine Panasonic battery is used, contact
the dealer.
If the terminal of the battery is dirty, remove the dirt and dust from the terminal.
0
554