10. Recording Videos
Synchronising the Time Code with an
External Device
Synchronise the time code default value with an external device that
supports time code signal input and output.
A Flash synchro socket
B BNC conversion cable (for TC IN/OUT) (supplied)
C BNC cable (commercially available)
D External devices
Preparations for Time Code Synchronisation
When [Count Up] is set to [FREE RUN] in the [
synchronise the initial value of the time code with an external device.
1
Set the mode dial to [
2
Set [Count Up] to [FREE RUN].
[
0
3
Rotate the flash synchro socket cap in the
direction of the arrow to remove.
Be careful not to lose the flash synchro socket
0
cap.
270
].
]
[
]
[Time Code]
] mode, you can
[Count Up]
[FREE RUN]