Panasonic Lumix S1H Operating Instructions Manual page 214

8. White Balance/Image Quality
[Grain Effect]
[Sharpness]
S
[Noise
Reduction]
[Dual Native ISO
Setting] ¢5
[Sensitivity]
[White
Balance]
¢1 Cannot be adjusted when [Like709], [V-Log], [Standard(HLG)],
[Monochrome(HLG)] or [Like2100(HLG)] is selected.
¢2 Available when anything other than [Monochrome], [L.Monochrome],
[L.Monochrome D], [V-Log] or [Monochrome(HLG)] is selected.
¢3 Available when [Monochrome], [L.Monochrome], [L.Monochrome D] or
[Monochrome(HLG)] is selected.
¢4 Available when [Monochrome], [L.Monochrome] or [L.Monochrome D] is selected.
¢5 Available when the following is set while [MY PHOTO STYLE 1] to [MY PHOTO
STYLE 10] are selected:
[ ] [
Effects] [Sensitivity]/[White Balance]
The effects of [Grain Effect] cannot be checked on the recording screen.
0
[Grain Effect] is not available when using the following functions:
0
– Video recording/[6K/4K PHOTO]/[Post-Focus]
214
[Low]/
[Standard]/
¢4
[High]
[Off]
Adjusts the outlines in the image.
Adjusts the noise reduction effect.
Increasing the effect may cause a slight drop in picture
0
resolution.
Sets the Dual Native ISO. (l 203)
¢5 Sets the ISO sensitivity. (l 200)
Sets the white balance. (l 204)
While [WB] is selected, press [
0
¢5 white balance setting screen.
Press [
] [Photo Style Settings]
Sets the grain effect level.
] again to return to the original screen.
[My Photo Style Settings]
[ON]
s
] to display the
[Add