[Monitor / Display] L; [Power Save Mode] L; [Monitor Frame Rate] L; [Lvf Frame Rate] L - Panasonic Lumix S1H Operating Instructions Manual

[Setup] menu
[Power Save Mode]
[Monitor Frame
Rate]
[LVF Frame Rate]
[Monitor / Display]
[Sleep Mode]
[Sleep Mode(Wi-Fi)]
[Auto LVF/Monitor
Off]
[Power Save LVF
Shooting]
This is a function to automatically turn the camera to sleep
(power save) status or turn off the viewfinder/monitor if no
operation is performed for a set time.
For details, refer to page 46.
0
[30fps]/ [60fps]
Sets the display speed for live view on the monitor when
recording pictures.
[30fps]: Reduces the power consumption for a longer
operating time.
[60fps]: Enables smooth display of movements.
When the following functions are being used, [Monitor
0
Frame Rate] is not available:
– [6K/4K PHOTO]
– HDMI output
[60fps]/[120fps]
Sets the display speed for live view on the viewfinder when
recording pictures.
[60fps]: Reduces the power consumption for a longer
operating time.
[120fps]: Enables smooth display of movements.
[LVF120] is displayed on the viewfinder when it is
0
displayed at [120fps].
When the following functions are being used, [LVF Frame
0
Rate] is not available:
– [6K/4K PHOTO]
– HDMI output
[10MIN.]/ [5MIN.]/[2MIN.]/[1MIN.]/
[OFF]
[ON]/[OFF]
[5MIN.]/[2MIN.]/[1MIN.]/[OFF]
[Time to Sleep]
[Method of Activation]
15. Menu Guide
445