Panasonic Lumix S1H Operating Instructions Manual page 218

8. White Balance/Image Quality
Setting a Filter with Touch Operation
The default settings are for the Touch Tab to not be displayed.
0
Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation])
menu. (l 425)
1
Touch [
2 Touch the item to set.
[ ]: Filter on/off
[ ]: Filter
[ ]: Filter effect adjustment
White balance will be fixed to [AWB] and the flash will be fixed to [Œ] (Forced
0
Flash Off).
The upper limit to ISO sensitivity is [6400].
0
When [High Dynamic] is set, the lower limit of the ISO sensitivity is fixed to
0
[400] and the higher limit to [6400].
The range of available ISO sensitivities is also different for [LOW] and [HIGH]
in [Dual Native ISO Setting].
– [LOW]: [AUTO] / [400] to [3200] (Base sensitivity: [400])
– [HIGH]: [AUTO] / [2500] to [6400] (Base sensitivity: [2500])
Reset the exposure if necessary when ISO sensitivity changes.
Depending on the filter, the recording screen may seem as if frames are
0
missed.
[Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter]/[Sunshine]
0
are not available when using the following function:
– [ ] mode
When using Super 35 mm/APS-C lenses, [Toy Effect]/[Toy Pop] are not
0
available.
When [Image Area of Video] is [S35mm] or [PIXEL/PIXEL], recording video
0
with [Toy Effect]/[Toy Pop] is not possible.
[Filter Effect] is not available when using the following functions:
0
– [High Resolution Mode]
– [Multiple Exposure]
218
].
EXPS EXPS EXPS
EXPS EXPS EXPS