Table of Contents
Advertisement
6
When [Send Images While Recording] is selected:
Take pictures.
This automatically sends the recorded pictures to the specified service as
0
they are taken.
[
] is displayed in the recording screen of the camera while a file is being
0
sent.
0
To end the connection, follow the steps below:
[
When [Send Images Stored in the Camera] is selected:
Select an image.
Select [Single Select] or [Multi Select], and then select one or more images.
0
(l 516)
0
To end the connection, select [Exit].
If image sending fails, a report email outlining the failure will be sent to the
0
email address registered in the "LUMIX CLUB".
Panasonic assumes no responsibility for any damages resulting from the
0
leakage, loss, etc. of images uploaded on web services.
When uploading images to a web service, do not delete images from the
0
camera, even after they have finished sending, until you have checked that
they have been properly uploaded to the web service.
Panasonic assumes no responsibility for any damages resulting from the
deletion of images stored on the camera.
Images uploaded to web services cannot be displayed or deleted with the
0
camera.
Images may contain information that can be used to identify the user, such as
0
recording dates and times, and location information. Check carefully when
uploading the images to a web service.
]
[
]
[Wi-Fi]
[Wi-Fi Function]
16. Wi-Fi/Bluetooth
[Yes]
505
Advertisement
Chapters
Table of Contents
