Panasonic Lumix S1H Operating Instructions Manual page 334

12. Connections with External Devices (Video)
[iA]/[P]/[A]/[S]/[M] Mode
Output is the same as [
Priority Display] is set to [ON].
Output is with a 16:9 aspect ratio during recording standby. Resolution,
frame rate, YUV, and bit value output matches the connected device.
When set to any [Aspect Ratio] other than 16:9, bands are added to the
0
images and they are output with a 16:9 aspect ratio.
Notice Regarding HDMI Output
It may take some time for the output method to change.
0
When you use the HDMI output during recording, the image may be displayed with a
0
time lag.
Beep sounds, AF beep, and electronic shutter sounds are muted during HDMI
0
output.
When you check the image and audio from the TV connected to the camera, the
0
microphone of the camera may pick up the sound from the speakers of the TV,
producing an abnormal sound (audio feedback).
If this occurs, move the camera away from the TV or lower the volume on the TV.
Certain setting screens are not output via HDMI.
0
There is no output via HDMI while you are using the following functions:
0
– [6K/4K PHOTO]/[Post-Focus]
334
] mode during video recording or when [Video-