Panasonic Lumix S1H Operating Instructions Manual page 224

8. White Balance/Image Quality
Setting Items ([High Resolution Mode])
[Start]
[Simul Record
Normal Shot]
[Shutter Delay]
[Motion Blur
Processing]
Picture Quality/Image Size After Merging
The recording [Picture Quality] will be [RAW].
0
RAW images recorded in [High Resolution Mode] cannot be processed from [RAW
0
Processing] in the [Playback] menu. Use the "SILKYPIX Developer Studio" software.
(l 531)
The image size will vary depending on the [Aspect Ratio] setting.
0
[Aspect Ratio]
[4:3]
[3:2]
[16:9]
[1:1]
224
Starts High Resolution mode.
Simultaneously takes pictures that are not merged when [ON] is
set. The first picture will be saved with [Picture Size] set to [L].
Sets the delay time from when the shutter button is pressed until
the shutter is released.
Sets the correction method to use when the subject moved.
[MODE1]: This gives priority to High Resolution mode, therefore
subject blur appears as an afterimage in the picture.
[MODE2]: This reduces afterimage from subject blur, but cannot
obtain the same High Resolution mode effect in the corrected
range.
10656k8000 (85 M)
12000k8000 (96 M)
12000k6736 (81 M)
8000k8000 (64 M)
Picture size