Panasonic Lumix S1H Operating Instructions Manual page 559

The recorded image looks rough.
Noise appears on the picture.
0 Try the following:
– Reduce the ISO sensitivity. (l 200)
– Increase [Noise Reduction] of [Photo Style] to the positive direction, or adjust each
item other than [Noise Reduction] to the negative direction. (l 213)
– Set [Long Exposure NR] to [ON]. (l 397)
The subject appears distorted on the image.
When a moving subject is recorded while using the following functions, the subject
0
may appear distorted in the picture:
– [ELEC.]
– Video recording
– [6K/4K PHOTO]
This is a characteristic of the CMOS sensor that is the image sensor of the camera,
and is not a malfunction.
Striping or flicker may appear under lighting such as fluorescent or
LED lighting.
This is characteristic of CMOS sensors which serve as
0
the camera's pickup sensors.
This is not a malfunction.
When using the electronic shutter (l 175), lowering the
0
shutter speed may reduce the effect of the horizontal
stripes.
If flicker is noticeable when recording pictures, set
0
[Flicker Decrease (Photo)]. (l 407)
If flicker or horizontal stripes are noticeable when recording video, this can be
0
mitigated by fixing the shutter speed.
Either set [Flicker Decrease (Video)] (l 411), or record in [
18. Materials
] mode (l 247).
559