Panasonic Lumix S1H Operating Instructions Manual page 192

7. Metering/Exposure/ISO Sensitivity
3
Start recording.
If the correct exposure is not achieved
0
when the shutter button is pressed
halfway, the aperture value and the
shutter speed blink red.
The effects of the set aperture value and shutter speed will not be visible on
0
the recording screen.
To check the effects on the recording screen, use [Preview]. (l 196)
The brightness of the recording screen and of actual recorded images may
0
differ.
Check the images on the playback screen.
Shutter speeds faster than 1/320 of a second are not available when you fire
0
the flash. (l 233)
You can customise dial operations:
0
[ ] [
The recording screen can display an exposure meter indicating the
0
relationship between aperture value and shutter speed:
[ ] [
192
] [Dial Set.]
] [Expo.Meter] (l 436)
[Assign Dial (F/SS)]/[Rotation (F/SS)] (l 428)
250 250 250