Panasonic Lumix S1H Operating Instructions Manual page 269

[Reset]
[Time Code
[Manual Input]
Value]
[Current Time]
[DF]
[Time Code
Mode] [NDF]
When the following functions are being used, [Time Code Mode] is
0
fixed to [NDF]:
– [50.00Hz (PAL)]/[24.00Hz (CINEMA)] ([Synchro Scan])
– 47.95p or 23.98p [Rec Quality]
Time code information is added to images output via HDMI when
recording with the [
The time code can also be output via HDMI by setting the mode
0
[HDMI Time
dial to [
Code Output]
[HDMI Mode (Playback)] in [TV Connection] to [AUTO]. (l 451)
The device screen may go dark depending on the connected
0
device.
0 Synchronise the time code default value with an external device
that supports time code input and output. (l 270)
[External TC [TC
Setting] Synchronization]
[TC Output
Reference]
Sets to 00:00:00:00 (hour: minute: second:
frame)
Manually input hour, minute, second and frame.
Sets hour, minute and second to current time
and sets frame to 00.
Drop Frame. The camera modifies the
difference between recorded time and time
code.
Seconds and frames are separated by ".".
0
(Example: 00:00:00.00)
Non-Drop Frame. Records the time code
without drop frame.
Seconds and frames are separated by ":".
0
(Example: 00:00:00:00)
] mode.
] during playback. In the [Setup] ([IN/OUT]) menu, set
Selects the input (l 273) and output (l 271) for
time code signals.
Sets the timing for time code signal output.
(l 271)
10. Recording Videos
269