Panasonic Lumix S1H Operating Instructions Manual page 611

Dual Native ISO
setting (Cinelike D2/
Cinelike V2)
Dual Native ISO
setting (HLG video/
HLG photo)
Image stabiliser
Image stabiliser type Compliant with Image sensor shift type, 5-axis stabiliser,
Image stabiliser
effect
White balance
White balance mode AWB / AWBc / AWBw / Daylight / Cloudy / Shade /
Base sensitivity: 200/1250 (dB display values
are based on 200)
Auto AUTO / 200 to 51200
When [Extended ISO] is set: AUTO / 100 to
204800
Base sensitivity: 200
Low
AUTO / 200 to 1600
When [Extended ISO] is set: AUTO / 100 to
sens.
1600
Base sensitivity: 1250
High
AUTO / 1250 to 51200
When [Extended ISO] is set: AUTO / 640 to
sens.
204800
Base sensitivity: 400/2500 (dB display values
are based on 400)
Auto AUTO / 400 to 51200
When [Extended ISO] is set: AUTO / 400 to
204800
Low Base sensitivity: 400
AUTO / 400 to 3200
sens.
Base sensitivity: 2500
High
AUTO / 2500 to 51200
When [Extended ISO] is set: AUTO / 2500 to
sens.
204800
Dual I.S.2
In-body image stabiliser: 6.0 stops
[Focal length f=50 mm, using an interchangeable lens
(S-X50)]
Dual I.S.2: 6.5 stops
[Focal length f=105 mm, using an interchangeable lens
(S-R24105)] ¢
(Based on the CIPA standard, Yaw/Pitch direction)
Firmware version 1.1 or higher
¢
Incandescent lights / Flash / Set mode 1, 2, 3, 4 /
Colour temperature 1, 2, 3, 4
18. Materials
611