1 Safety Precaution 1.1. General Guidelines 1.3. Leakage Current Hot Check 1. IMPORTANT SAFETY NOTICE (See Figure 1.) There are special components used in this equipment 1. Plug the AC cord directly into the AC outlet. Do not use which are important for safety. These parts are marked by an isolation transformer for this check.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...
2.3.2.3. How to Replace the Fuse A replacement fuse cover can be purchased from your local Panasonic Dealer. 1. Remove the Fuse Cover with a screwdriver. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety.
2.4. How to Replace the Lithium Battery 2.4.1. Replacement Procedure 1. Remove the FRONT PCB. (Refer to Disassembly Procedures.) 2. Remove the Lithium battery (Ref. No. “B6801” at component side of FRONT PCB) and then replace it into new one. NOTE: This Lithium battery is a critical component.
3 Service Navigation 3.1. Introduction This service manual contains technical information, which allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual. 3.2.
• b) SDR-S10PC • c) SDR-S10E/EB/EF/EG/EP • d) SDR-S10EE • e) SDR-S10GN • f) SDR-S10PL/GC, SDR-S18GK What is the difference is that the “INITIAL SETTING” data which is stored in Flash ROM mounted on Main PCB. 3.4.1. Defining methods: To define the model suffix to be serviced, refer to the rating label which is putted on the bottom side of the Unit.
6 Service Mode 1. Indication method of the service menu Set the mode dial “Video playback“ mode. 2. While keep pressing the “[LEFT<] of cursor” button, “record” button and “delete” button for more than 3 seconds until the top screen of the Service Menu being displayed. Service mode menu Screen display Contents...
6.1. Lock Search History Indication 1. Set the mode dial “Video playback“ mode. 2. While keep pressing the “[LEFT<] of cursor” button, “record” button and “delete” button for more than 3 seconds until the top screen of the Service Menu being displayed. 3.
7 Service Fixture & Tools 7.1. When Replacing the Main PCB After replacing the MAIN PCB, be sure to achieve adjustment. The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in “TSN system”, together with Maintenance software. 7.2.
8.3. Disassembly Procedure Item Removal LCD hinge unit, Fig. D21 4 Screws (P) Item Removal Monitor P.C.B. Packing angle Front case unit Fig. D1 2 Screws (A) 4 screw O rings Front case unit 2 Screws (Q) Tripod piece Fig. D2 2 Screws (B) Fig.
Page 17
8.3.2. Removal of the Tripod piece 8.3.1. Removal of the Front case unit Fig. D1 Fig. D2...
Page 18
8.3.3. Removal of the Rear cover Fig. D5 8.3.5. Removal of the Lens piece, Lens protection glass and Lens damper Fig. D3 8.3.4. Removal of the R cover Fig. D6 Fig. D4...
Page 19
8.3.6. Removal of the Side case (L) unit Fig. D8 8.3.7. Removal of the Lens unit/ Main P.C.B Fig. D9 Fig. D7...
Page 20
8.3.9. Removal of the Battery catcher unit Fig. D10 8.3.8. Removal of the Radiation plate Fig. D12 8.3.10. Removal of the Main P.C.B. and Jack P.C.B. Fig. D11 Fig. D13...
Page 21
8.3.12. Removal of the Battery case Fig. D14 8.3.11. Removal of the Lens unit Fig. D16 8.3.13. Removal of the Front P.C.B. Fig. D15 Fig. D17...
Page 22
8.3.14. Removal of the Battery door unit Fig. D18 8.3.15. Removal of the LCD unit Fig. D20 Fig. D19...
Page 23
8.3.16. Removal of the LCD hinge unit and Monitor P.C.B. Fig. D21 Fig. D22...
Page 24
8.3.17. Removal of the LCD panel Fig. D23 Fig. D24...
Page 25
8.3.18. Removal of the Speaker unit and Operation FPC unit Fig. D26 Fig. D25...
Page 26
8.3.20. Removal of the IRIS unit Fig. D27 8.3.19. Removal of the CCD unit and Optical filter Fig. D29 Fig. D30 Fig. D28...
Page 27
8.3.21. Removal of the Zoom motor unit 8.3.23. Removal of the Master flange, 4th moving frame unit and 3rd moving frame unit Fig. D31 Fig. D33 8.3.22. Removal of the Focus motor unit 8.3.24. Removal of the Guide pole S, Guide pole and 2nd moving frame unit Fig.
9 Measurements and Adjustments 9.1. Electric Adjustment • Adjustment method is different from a conventional SD video camera. • An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment. • A USB driver for service is necessary to communication with PC. •...
Page 29
Adjustment Items • Adjustment item as follows. The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-PAVC" web-site in "TSN System".
10 Factory Setting 10.1. HOW TO TURN ON THE FACTORY SETTINGS? 1. Set the mode dial “Video playback“ mode. 2. While keep pressing the “[LEFT<] of cursor” button, “record” button and “delete” button for more than 3 seconds until the top screen of the Service Menu being displayed.
Page 31
4.Although the voltage and waveform available on here is measured with standard frame, it may be differ from actual measurement due to modification of circuit and so on. SDR-S10PC SDR-S10EG SDR-S10PL SDR-S10EP 5.The voltage being indicated here may be include observational-error (deviation) due to SDR-S10E SDR-S10GC internal-resistance and/or reactance of equipment.
S2. Voltage Chart Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester. S2.1.
S6. Replacement Parts List Note: 1.* Be sure to make your orders of replacement parts according to this list. 2. IMPORTANT SAFETY NOTICE Components identified with the mark have the special characteristics for safety. When replacing any of these components, use only the same type. 3.
Page 44
SDR-S10P-K,PC-K,EB-K,EE-K,EF-K,EG-K,E-K,EP-K,GC-K,GN-K,PL-K, S18GK-S vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks FP8101 K1MN25AA0035 CONNECTOR VEP03H23A MAIN P.C.B. 1 (RTL)E.S.D. P,PC,PL FP8102 K1MN24BA0197 CONNECTOR VEP03H23B MAIN P.C.B. 1 (RTL)E.S.D. EB,EF,EG,E,EP L8101 G1C101KA0055 CHIP INDUCTOR 100UH VEP03H23C MAIN P.C.B.
Page 45
SDR-S10P-K,PC-K,EB-K,EE-K,EF-K,EG-K,E-K,EP-K,GC-K,GN-K,PL-K, S18GK-S vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks R6507 ERJ2GEJ103 M.RESISTOR CH 1/16W 10K R6509 ERJ2GEJ102X M.RESISTOR CH 1/16W 1K 1 ERJ2RMJ102X R6801 ERJ6GEYJ222V M.RESISTOR CH 1/10W 2.2K VA4801 D4ED1270A007 SURGE ABSORBER VA4802 D4ED1270A007 SURGE ABSORBER...
Page 46
SDR-S10P-K,PC-K,EB-K,EE-K,EF-K,EG-K,E-K,EP-K,GC-K,GN-K,PL-K, S18GK-S vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks XQN16+BJ4FN SCREW VGQ9367 FRONT PANEL TAPE XQN16+BJ6FJK SCREW VYK2D17 MAIN FRAME UNIT XQN16+BJ6FJK SCREW VEP03H23A MAIN P.C.B. 1 (RTL)E.S.D. P,PC,PL XQN16+BJ6FJK SCREW VEP03H23B MAIN P.C.B.
Page 47
SDR-S10P-K,PC-K,EB-K,EE-K,EF-K,EG-K,E-K,EP-K,GC-K,GN-K,PL-K, S18GK-S vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VMP8805 PACKING ANGLE VXW0874 LENS UNIT VUKM7110 LCD CASE BOTTOM UNIT VMX3282 CCD CUSHION RUBBER VSQ1246 MAGNET VDL1390 OPTICAL FILTER VSC5959 LCD SHIELD CASE VXQ1505 BODY UNIT...
Page 48
SDR-S10P-K,PC-K,EB-K,EE-K,EF-K,EG-K,E-K,EP-K,GC-K,GN-K,PL-K, S18GK-S vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks 300 ------------ BATTERY PACK K2KZ9CB00002 AV CABLE 302 VSK0688 AC ADAPTOR 1 P,PC 302 VSK0686 AC ADAPTOR 1 EB,EE,EF,EG,E,EP,GC,GN,PL ...