General Safety Information; Transporting The Camera - Dentsply Sirona CEREC AF Operating Instructions Manual

4 Safety
4.1 Basic safety information
12
4.1.3

General safety information

CAUTION
Do not damage the monitor
DO NOT touch the LCD screen with sharp or pointed objects.
If the LCD monitor is damaged (e.g. the glass screen is broken),
prevent any leaking liquid from coming into contact with your skin,
mucous membranes (eyes, mouth), or foodstuffs and be careful not to
inhale any escaping vapors.
Rinse any parts of your body or items of clothing already
contaminated by the liquid with ample amounts of water and soap.
CAUTION
Note on the prevention, recognition, and elimination of unintended
electromagnetic effects:
CEREC AF / CEREC AI / CEREC AF Connect / CEREC AI Connect /
CEREC AI for Rear is Class B equipment (classified according to
CISPR 11, EN 60601-1-2:2015 based on IEC 60601-1-2:2014).
This system may be operated in a residential area provided that it is
used under the responsibility of a medical specialist.
CAUTION
If the unit is damaged, it must be decommissioned immediately and
remain thus until it has been repaired by a certified engineer.
NOTE
Install only approved software
To prevent interference with the runtime reliability of the program,
only approved software may be installed.
➢ Use version ≥ CEREC SW 5.1 (not for CEREC AF Connect/
CEREC AI Connect)
➢ Use version ≥ Connect SW 5.1.
4.1.4

Transporting the camera

CAUTION
Trip/fall hazard
When transporting the camera, be aware that you might trip over the
cable and fall. This is particularly the case if the 50cm camera
extension cable is used.
➢ When transporting the camera, please ensure that the free cable
ends are coiled.
The camera can be detached from the storage cradle for use in
treatment rooms.
Dentsply Sirona
Operating Instructions (valid for Canada)
66 37 487 D3652
D3652.201.01.21.02 03.2021