Pc Diagnostic Tool; Start Diagnostic Tool - Dentsply Sirona CEREC AF Connect Operating Instructions Manual

Hide thumbs Also See for CEREC AF Connect:
Table of Contents

Advertisement

Available languages

Available languages

10 PC Diagnostic Tool
10.1 Start diagnostic tool
74
Operating Instructions (valid for Canada) CEREC AF, CEREC AF Connect
10

PC Diagnostic Tool

10.1

Start diagnostic tool

Test
Customer Diagnostics
Technician Diagnostics
Sirona Windows Diagnostics
Tip: If one of the following steps does not work, further steps can be found
in the Service Manual.
The PC is switched off.
1. Switch on the PC.
2. Repeatedly press the "F11" or "F8" button (in V2.2.1 - V2.2.3) until the
PC switches to the boot menu.
3. Insert the diagnostics tool CD into the drive.
4. Select the "P3: TSSTcorp CDDVDW ..." menu option.
5. Confirm your selection with the "Return" key on the keyboard.
 The diagnostics tool starts and a selection menu appears.
Tip: After one minute, if none of the arrow keys have been
pressed, the "Customer Diagnostics" test starts
automatically.
6. Select the test using the arrow keys.
7. Confirm your selection with the "Return" key on the keyboard.
 The test starts.
Suitable for
Suitable for the user, in order to check
the PC components.
Suitable for the technician, in order to
check the PC components.
Windows Stress Test, in order to test
the PC at permanent load.
D3652.201.01.14.02 10.2017
Dentsply Sirona
66 37 487 D3652

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cerec aiCerec ai connect

Table of Contents