Technical Information; Technical Description - Dentsply Sirona CEREC AF Connect Operating Instructions Manual

Dentsply Sirona
Operating Instructions (valid for Canada) CEREC AF, CEREC AF Connect
66 37 487 D3652
D3652.201.01.14.02 10.2017
5

Technical information

5.1

Technical description

CAD system for high-precision intraoral optical impressions
● High-resolution, heated oral camera (3D camera) with removable
reflective sleeve (reflective sleeve sterilizable with hot air)
● Integrated image processing
● High processing power due to state-of-the-art processor
● Camera storage cradle can be disinfected by wiping.
High-resolution 3D intraoral camera with control and image
processing electronics
● Measuring technique:
● Light source:
● Image acquisition:
● Image data transfer:
PC hardware requirements (V3.4.1)
Special PC with the following equipment:
● Processor:
● Memory:
● DVD-R(W)/CD-R(W):
● Hard disk:
● Onboard network:
● Network card:
● WLAN card:
● Sound card:
● Graphics card:
PC software requirements
● Operating system:
● Installation:
5 Technical information
Triangulation
White LED, unpolarized, visible
spectral range
Image control inside the camera
Gigabit Ethernet Standard
Intel i7 5820K
2 x 8GB, 2133MHz DDR4-RAM
SH-224 combi drive
1TB 2.5" S-ATA SSHD
Ethernet 10/100/1000MBit/s
Ethernet 10/100/1000MBit/s intel
PCIe
TP-Link TL-WDN4800
Realtek HD Audio onboard
AMD R9 285
Windows Embedded Standard 7,
64Bit
The operating system is installed at
the factory.
During initial start of the PC, the
language selection is made.
17