Table of Contents
Advertisement
SUN2000-(33KTL, 36KTL, 40KTL)-US
User Manual
Step 3 Align the mounting bracket holes with the drilled holes, insert supplied bolt assemblies (flat
washers, spring washers, and bolts) into the holes through the mounting bracket, and secure
them using stainless steel nuts and flat washers.
Figure 4-21 Securing a mounting bracket
----End
4.6 Installing the SUN2000
Procedure
Step 1 If the installation position is low and you can mount the SUN2000 onto the mounting bracket,
go to
Step 2 If the installation position is high and you cannot mount the SUN2000 onto the mounting
bracket, perform
Step 3 Ensure that two people lift the SUN2000 and turn it upright. Lift the SUN2000 by grasping
the handle at the bottom of the SUN2000 with one hand and the handle at the top with the
other.
To prevent personal injury caused by a falling SUN2000, keep balance when lifting the
SUN2000 because it is heavy.
Issue 07 (2019-06-20)
If the screw length does not meet the installation requirements, prepare M12 bolt assemblies by yourself.
Step 3
and then
Step
5.
Step 3
to
Step
Copyright © Huawei Technologies Co., Ltd.
6.
4 System Installation
34
Advertisement
Table of Contents
