Table of Contents
Advertisement
SUN2000-(33KTL, 36KTL, 40KTL)-US
User Manual
Figure 5-50 Routing cables
Step 2 Remove the cable terminal base from the terminal block. Connect the communications cables
to the terminal base.
Figure 5-51 Connecting cables to a terminal base
(1) RS485A IN
(3) RS485B IN
Step 3 Install the terminal base on the terminal block, and connect the shield layers to the ground
point.
Issue 07 (2019-06-20)
When connecting the shielded cables, choose whether to crimp the OT terminal based on site
requirements.
Copyright © Huawei Technologies Co., Ltd.
(2) RS485A OUT
(4) RS485B OUT
5 Connecting Cables
80
Advertisement
Table of Contents
