Installing The Sun2000 - Huawei SUN2000-90KTL Series User Manual

SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual
● To prevent dust inhalation or contact with eyes, wear an anti-dust respirator
● Clean up any dust in and around the holes using a vacuum cleaner and
● Level the head of the expansion sleeve with the concrete wall after removing
Step 3 Secure the mounting bracket.
Figure 4-10 Installing the mounting bracket
----End

4.5 Installing the SUN2000

Context
● Handle the SUN2000 with care when moving it to prevent device damage and
● It takes multiple persons or a pallet truck to move the SUN2000.
● Do not place the SUN2000 with its wiring terminals at the bottom contacting
● When you need to temporally place the SUN2000 on the ground, use foam,
Issue 16 (2023-12-20)
NO TICE
and safety goggles when drilling holes.
measure the distance between holes. If the holes are inaccurately positioned,
drill a new set of holes.
the bolt, spring washer, and flat washer. Otherwise, the mounting bracket will
not be securely installed on the concrete wall.
NO TICE
personal injury.
the floor or any other objects because the terminals are not designed to bear
the weight of the SUN2000.
paper, or other protection material to prevent damage to its cover.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
39