SUN2000-(33KTL, 36KTL, 40KTL)-US
User Manual
Figure 4-17 Drilling holes
Step 3 Align the mounting bracket holes with the drilled holes, insert supplied bolt assemblies (flat
washers, spring washers, and bolts) into the holes through the mounting bracket, and secure
them using stainless steel nuts and flat washers.
Figure 4-18 Securing a mounting bracket
----End
Issue 07 (2019-06-20)
If the screw length does not meet the installation requirements, prepare M12 bolt assemblies by yourself.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
32