Table of Contents
Advertisement
SUN2000-(33KTL, 36KTL, 40KTL)-US
User Manual
Figure 5-8 Pipe
(1) Nut
Figure 5-9
waterproof connectors are removed.
Figure 5-9 Diameters of the bottom cable holes
Procedure
Step 1 Install the pipe fittings.
1.
2.
3.
Issue 07 (2019-06-20)
(2) Fitting
The pipe appearance is for reference only. The actual pipe prevails.
shows the diameters of the cable holes at the bottom of the chassis after the
Following are the reference torque values for the waterproof connector and pipe. Observe the
requirements of the specific manufacturer, if any.
AC OUTPUT and COM ports: 7.5 N•m (plastic) or 10 N•m (metal)
RESERVE port: 3.75 N•m (plastic) or 6.25 N•m (metal)
Remove the AC filter and keep the screws aside.
Remove the locking cap and plug from the waterproof connector, and then remove the
waterproof connector.
Secure the pipe fittings to the chassis using the nut delivered with the pipe.
Copyright © Huawei Technologies Co., Ltd.
5 Connecting Cables
(3) Conduit
49
Advertisement
Table of Contents
