Table of Contents
Advertisement
3
Installing the SUN2000
• The M12x40 bolt assemblies are delivered
with the SUN2000. If the bolt assembly
length does not meet the installation
requirements, prepare M12 bolt assemblies
by yourself and use them together with the
delivered M12 nuts.
• Before installing the mounting bracket,
remove the security Torx wrench from the
mounting bracket and save it for later use.
• This document introduces how to install the
SUN2000 on a support as an example. For
details about wall-mounted installation, see
the user manual.
1. Install the mounting bracket.
You are advised to
apply anti-rust paint on the
hole positions for protection.
2. Install the SUN2000 on the mounting
bracket.
3. Tighten security Torx screws.
3
Position for bundling
a security Torx
wrench
IS06H00040
M6
5 N· m
IS07H00011
Advertisement
Table of Contents
